Table of Contents
Advertisement
MAINTENANCE
The plug must ALWAYS be disconnected from the socket before carrying out any work on the
device!
Always perform a visual inspection before use to determine if the equipment, and in particular the
power cord and plug, are damaged.
The device must not be used if it is damaged or the safety devices are defective.
If the device is defective, the repair must be carried out exclusively by the manufacturer's cus-
tomer service or by an authorised service partner. Only original accessories and original spare
parts may be used.
Only a regularly maintained and well-maintained device can be a satisfactory aid. Defects in main-
tenance and care can lead to unforeseeable accidents and injuries.
The machine and in particular the ventilation slots must always be kept clean. Acidify the chip
ejection and/or dust extraction regularly.
Treat all moving parts with an environmentally friendly oil.
INSPECTION AFTER RECEIPT
The machine is supplied with accessories. Please check the unit and accessories for completeness
and do not put the unit into operation until it has been properly and completely assembled. In case of
missing or defective parts, contact the manufacturer or an authorized service partner.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 29
Advertisement
Table of Contents
