Table of Contents
Advertisement
INTRODUCTION
Only use the device after you have carefully read and understood the operating instructions. Observe
all safety instructions in this manual. Behave responsibly towards other persons. If there is any doubt
about the connection and operation of the device, please contact the customer service of the manufac-
turer or an authorized service partner.
INTENDED USE
The circular table saw may only be used for sawing wood and wood products. This device may only be
used for its intended purpose. The manufacturer cannot be held responsible for any damage resulting
from non-compliance with the requirements of the general regulations and the provisions of these in-
structions.
Work pieces with a round or irregular cross-section (e.g. firewood) must not be sawn, as they
cannot be held securely during sawing.
OPERATOR REQUIREMENTS
The operator must have carefully read and understood the operating instructions before using the de-
vice. As the use of the device can be very dangerous if it is handled incorrectly, only qualified person-
nel may be allowed to use it.
The operator must be adequately trained in the setting, operation and use of the machinery.
Qualification: Apart from a detailed instruction by a competent person, no special qualification for the
use of the device is necessary.
Minimum Age: The unit may only be operated by persons who have reached the age of 18. An ex -
ception is the use as a young person, if the use in the course of a professional training to achieve the
skill under strict supervision of an instructor.
Training: The use of the device only requires appropriate instruction by a competent person or the op-
erating instructions. The operator is responsible for accidents or hazards to third parties.
© by WilTec Wildanger Technik GmbH
Seite 23
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Table of Contents
