Table of Contents
Advertisement
4) Use and handling of the power tool
a) Do not overload the device. Use the appropriate power tool for your work. With the
appropriate power tool you will work better and safer in the specified power range.
b) Do not use any power tool with a defective switch. A power tool that can no longer be
switched on and off is dangerous and must be repaired.
c) Unplug and/or remove the battery before making any adjustments, changing any
accessories, or putting the unit away. This precaution prevents the power tool from ac-
cidentally starting.
d) Keep unused power tools out of the reach of children. Do not allow anyone to use
the unit who is not familiar with it or has not read these instructions. Power tools are
dangerous when used by inexperienced persons.
e) Carefully maintain power tools. Check that moving parts function correctly and do
not jam, that parts are broken or damaged in such a way that the function of the
power tool is impaired. Damaged parts must be repaired before using the unit
again. Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting
edges jam less and are easier to guide.
g) Use power tools, accessories, insert tools, etc. according to the instructions. Take
into account the working conditions and the activity to be performed. The use of
power tools for applications other than those for which they are intended can lead to dan-
gerous situations.
5) Service
a) Have your power tool repaired only by qualified personnel and only with Ori-ginal
spare parts. Alternatively, contact the manufacturer or an authorized service part-
ner. This ensures that the safety of the electric tool is maintained.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Seite 27
Advertisement
Table of Contents
