Technical Data; Remaining Risk - WilTec 61935 Operation Manual

TECHNICAL DATA

Power Supply:
Rated Power Consumption:
Idling Speed:
Saw blade diameter x drill diameter:
Splitting Wedge Thickness:
Cutting Depth max. 90°:
Cutting Depth max. 45°:
Weight:
Sound Pressure Level LPA (1):
Sound Power Level LWA (1):
Vibration Emission Value ah (2):
(1) Measured according to EN 61029, Inaccuracy K=3 dB (A)
(2) Measured according to EN 61029
Protection Class II
Warning: The actual vibration emission value may differ from the indicated value depending on the
method of application.
The vibration level can be used to compare power tools with each other. It is also suitable for a prelimi-
nary assessment of the vibration load. For an accurate estimation of the vibration load, the times when
the device is switched off or running but not in actual use should also be taken into account. This can
significantly reduce the vibration load over the entire working period.
Establish additional safety measures to protect the operator from the effects of vibrations such as:
Maintenance of power tools and tools for use, keeping hands warm, organisation of work procedures.

REMAINING RISK

Risk of injury! Never bring your hands into the area of the saw blade. Despite compliance with all rel-
evant construction regulations, there may still be hazards when operating the machine, e.g. due to:
Fly away of workpiece parts

Flying away of tool parts when tools are damaged

Noise emission

Wood dust emission

© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
230 V / 50 Hz
800 W
2950 U/min
200 mm x 16 mm
2,2 mm
45 mm
27 mm
ca. 2,5 kg
97 dB (A)
110 dB (A) (Wear hearing protection!)
<2,5 m/s²
Seite 24