Samsung IER Series Installation Manual page 3

Dehumidification guidance
 When moist gets into LED package because of high humidity, 'Line defect' can
be caused by electrical short inside of LED Package.
 For keeping the best quality of products during installation, please refer to the
below cautions.
- If the condition meets one of the below cases at least, dehumidification MUST be
processed. Do not play any contents on the screen before dehumidification finishes.
∙ Case when vacuum packaging is already unsealed before unpacking products.
∙ Case when environment condition is worse than Samsung working condition (0°C~40°C/10~80%RH).
∙ Case when it elapses longer than 7 days after unpacking them, even though the environment condition
satisfies Samsung working condition (0°C~40°C/10~80%RH).
∙ Case when production date on the label elapses more than 6 months, even though vacuum packaging is
sealed.
∙ Case when volatile chemicals such as oil paint, solvent are used in same place of installation.
(You can refer to
- If the screen needs dehumidification on installation, MUST follow the directions of next page.
Product Information and Precautions for Installation part in detail.)
This contents must be noticed to customer.
Please print this page and hand it to user.
– during installation