1.3.2 Windows ME
1)After connecting the MG-45, plug in the power cable,
Windows will install the driver automatically.
Then, check the driver installation at Windows [Start >
Settings > Control Panel > (view all Control Panel
options) > System > Device Manager > Universal
Serial Bus controllers > USB Mass Storage Device].
2) Check 'My Computer' or 'Explorer', there should be
a new volume. You can now copy data to this volume.
If a new volume has not appeared, check that the HDD
is formatted and partitioned and also check the HDD file
system.
3)After copying data, remove the MG-45 using the
in Windows right-hand corner. If
remove icon
you don't follow this procedure, data may be lost and
damage to the MG-45 may result.
15