Connect Audio Cable; Connect External Ir Receiver - AL Tech Portable MPEG Player Manual

2.1.2 Connect Audio Cable

Mpeg4 Player supports 2 type of audio output; "Stereo, Coaxial". Use audio connection that your TV or Audio set
supports. Do not connect USB cable when connecting TV.
•Coaxial: Digital 5.1 Ch. •
: Connect to IR/5.1 jack of Mpeg4 Player.
Supplied
Coaxial
Cable
Connect to Coaxial jack of Amplifier
or Receiver.
When you can not hear sound after connecting Coaxial Cable, you have to change audio setup of Mpeg4 Player as Encoded
Digital. See "2.2.2 Audio Setup"

2.1.3 Connect External IR Receiver

External IR Receiver is optional package, not primary one.
Connect the external IR receiver to IR/5.1 jack of Mpeg4 Player instead of Coaxial cable. External IR Receiver and
Coaxial cable are not used at the same time.
•Stereo•
: Connect to AV jack of Mpeg4 Player.
Supplied
AV Cable
Yellow White
Connect to Audio Jacks of TV
White = L (Left) Audio Input / Red = R (Right) Audio Input
18
Red