Table of Contents
Advertisement
10 of 20... 8700 SERIES REMOTE CONTROL
BEHAVIOR & BASIC MODES OF THE NAVIGATOR
Pressing
as many times as necessary, we set the navigator modes:
LV, TB & WH
Level wheel, LV
This is the working mode by default. It allows you to assign a dimmer level to the channels or fixtures:
Press ENT to toggle between the modes LV & LV
Keys
Trackball, TB:
This mode permits us to control the position (x & y parameters) of the selected fixtures:
ENT is the FINE command. Pressing this key to toggle to the different trackball sensibilities. The state of the
console key FINE can be seen in the state line of the remote.
Keys
Active parameters wheel, WH:
It allows you to control the parameter in the active wheel.
Press ENT to toggle between the modes WH & WH
Fine adjustment WH
Keys
Increases the parameter in continuous mode
Decreases the parameter in continuous mode
Go to the previous parameter
Go to the next parameter
OTHERS NAVIGATOR MODES, INTERACTIVES
Master mode, m01
It allows you to control the selected master from the navigator (fader and associated key).
To select this mode, press the software key: m 01.
01 is the master number selected in the navigator. It can be from m01 to m24 or m01 to m24, in
accordance with the console model. Just after to press m 01, we can enter 2 numbers to select the
master wished. Thus to select the master 14, we can press m 01 1 4
ENT is the associated key to the master, and it can work in mode: GO / FLASH / SOLO.
±
Fine adjustment LV
Increase level a 1%
Decrease level a 1%
none
none
Mode: TB
Trackball
Trackball
Trackball
Trackball
Keys
Increases output level for master 01
Decreases output level for master 01
Selects the previous master (in this case the m48)
Selects the next master (in this case the m02)
ENT
GO master 01
LEVITON 8700 SERIES
Coarse adjustment LV+/-
Increase level a 5%
Decrease level a 5%
none
none
ENT
FINE Status
Normal adjustment
f
Fine adjustment
F
Coarse adjustment
±
Coarse adjustment WH
Increases the parameter in step mode,
Decreases the parameter in step mode,
Go to the previous parameter
Go to the next parameter
m01
±
Advertisement
Table of Contents
