Table of Contents
Advertisement
8700 SERIES CONSOLE
8700-LINK port
SUBD-9 female connector. Used to connect the 8700 SERIES with the remote control (via cable) or with the
RF receiver (via wireless). This connector has the needed VDC to supply the RF receiver or remote. Code:
Pin 1.- GND
Pin 2.- TXD-
Pin 3.- TXD+
Pin 4.- +VDC
Pin 5.- GND
Pin 6.- +VDC
Pin 7.- RXD+
Pin 8.- RXD-
Pin 9.- GND
CABLE CODE FOR CONNECTION OF 8700-LINK PORT
CONNECTOR
PIN Nº - SIGNAL
PS/2
1 - RXD+
MALE
2 - RXD-
3 - TXD+
(TO REMOTE
5 - TXD-
OR
6 - +VDC
RECEIVER)
8 - COMMON
It is advised a category cable 5 of a maximum of 100m of length. On this cable, that has 4 pars, we should
use: 1 par for the signs RXD+ and RXD -; other par for TXD+ and TXD -, other par for +VDC and other for
the COMMON.
INSTALLATION
This cable length permits us to install the receiving RF or the own remote control, working via cable, in
places far from the console. In the cable, with the distance, it more easy that is downgraded the supply
(+VDC) that the communication (RXD+/RXD - and TXD+/TXD -)... by this motive, as remote as receiver,
have an external supply input (POWER), and even the remote control has on internal battery.
8700 SERIES REMOTE CONTROL...7 of 20
PIN Nº - SIGNAL
CONNECTOR
3 -
TXD+
2 -
TXD-
7 -
RXD+
(TO CONSOLE)
8 -
RXD-
4 y 6 - +VDC
1, 5 y 9 - GND
LEVITON 8700 SERIES
SUBD9
MALE
Advertisement
Table of Contents
