Menu Test In; Menu Test Out; Menu Test Display; Menu Soft Version - Leviton 8700 Series User Manual

Hide thumbs Also See for 8700 Series:
Table of Contents

Advertisement

MENU TEST IN

Select this menu to check:
Inner battery level and charge process.
Status of the port: 8700-LINK
Any pressed key (of the remote).
KEYS IN THE CONSOLE
From the 8700 SERIES CONSOLE, you can test the correct communication with the remote. Select the
console menu 80:Inputs, and observe that all keys, pressed in the remote, appears in the up-right corner
of this monitor page:
REMOTE
ID FUNC
ST
0
00125 1
Where, ID is the ID number of your remote, FUNC is the code of the sent function and ST is the status
of this function (1 when the function is pressed and 0 when the function is released).
Note: Some keys of the remote are not sent (for example, SHIFT, of internal use).

MENU TEST OUT

Select this menu to check:
All LED.
All dot of the display.

MENU TEST DISPLAY

Select this menu to exam the characters used for the alphanumeric display.

MENU SOFT VERSION

Select this menu to exam the software version of the remote.

MENU SETUP

Select this menu to configure the remote. Options are:
Remote ID
For the radio communication, the remote has 12 different frequency channels (ID) for the
communication, with values from 1 to 12. Here we configure the wished channel, ID that it must
be just as the ID set in the console. In case of interferences in the communication, the first option,
it is always to change the ID in remote and console.
In the cable remotes, the ID of remote and console also they should be the same.
The remote has a configurable function, placed in the software keys in mode Keys, . Its options
are:
a) Macro 0001
Option that allows you to execute a macro pressing . By default the macro 1. Once it selected
this option, we can use the numerical keyboard to set the wished number of macro. In the
software key, we will see 001
b)
Option by default, it allows you to use the chronometer. Press
press
again to stop the chronometer. This time starts from 0.0
key, we will see
8700 SERIES REMOTE CONTROL...15 of 20
LEVITON 8700 SERIES
to start the chronometer, and
seconds.
In the software

Advertisement

Table of Contents
loading

Table of Contents