Use Basic Of The Remote Control & This User Manual - Leviton 8700 Series User Manual

USE BASIC OF THE REMOTE CONTROL & THIS USER MANUAL
The greater part of the keys of the remote control has 2 functions associated, one direct and other secondary.
To access to the secondary function is needed press the key: SHIFT
Some examples:
The keys have the direct function labelled in the bottom of the key or/& in a white field. Usually, the
secondary functions are less used than the direct functions.
To access to the secondary function is not necessary hold down pressed SHIFT. Press first SHIFT and
then the associated key.
A "double click" of a direct function are 2 consecutive strokes of the associated key done quickly.
A "double click" of a secondary function, are 2 consecutive strokes of SHIFT done quickly, a then, 1
strokes of its associated key. In example, to access to MDFY MDFY pressing pulsando SHIFT SHIFT
rec.
Each time that SHIFT is pressed, in the display will appear: SH, shows us that we can to access to
secondary function of the next pressed key, and the keyboard is lit in green.
Each time that SHIFT SHIFT is pressed, in the display will appear: SHx2, shows us that we can to access
to a "double click" of the secondary function of the next pressed key, and the keyboard is lit in green.
The status flags and others information in the display, are always written as: STATUS LINE.
Keys and menus/command in the display are showed as: KEY
In the display, the first line is the state line, 3 following show us the commands line of the console, the
following or fifth line we use it as interactive line, normally with the navigator mode, and the next line for
notice and mistake messages. The rest is used to represent the current functions of the programmable keys
(direct & secondary).
And to emphasize that the navigator of the remtoe has several operation modes, and from the same can
achieve many of the functions of the console, as level wheel, trackball, active parameter wheel, masters,
cursors. It is formed by 5 basic keys, more a mode key, that we go to represent as:
Access to the function grp that is the direct function of this key
Access to the function CUE that is the second function of this key
Access to the function rec that is the direct function of this key
Access to the function MDFY that is the direct function of this key
ENT, to access to this key press in the centre of the arrows
, to access to this key press in the top of the arrows
, to access to this key press in the bottom of the arrows
, to access to this key press in the left of the arrows
, to access to this key press in the right of the arrows
, mode function to configure the navigator, that shares key with the secondary
function MENU
LEVITON 8700 SERIES
8700 SERIES REMOTE CONTROL...9 of 20