Table of Contents
Advertisement
18 of 20... 8700 SERIES REMOTE CONTROL
CROSSFADERS PLAYBACK
During the rehearsal, it is possible to use the remote to playback the different scenes. If it is desired to do
these changes of scenes in crossfade mode, you can playback these cues in a crossfader.
Assign to the crossfader with the cues or loop cues, or page desired. Then, you can playback these cues with
the commands GO & PS.BACK
Examples of assignation in the crossfaders:
Assign the page 1 in the crossfader:
Assign the cues from 1 to 23 in the crossfader:
Assign all stored cues in the crossfader:
From here, the crossfader playback commands can be used. The basics:
go, start the next crossfade, GO.
p.bk, pause the current crossfade, PAUSE, or start in reverse direction, BACK, the paused or ended
crossfade.
Remember, the remote has the special function: X . This function permits us to eliminate the crossfader
scene output (crossfader output at 0%). And these command places in X2 the last playback cue, ready to be
started with the next GO.
MASTERS PLAYBACK
You can to playback the masters contents (cues, groups, effects, etc), using the remote, that provides us an
easy way to control them.
To load the masters, in example, you can:
Load the page 1 in all masters:
Load the cues 1-12 in masters 1-12:
Load the effect 1 in the masters 25:
When the masters are loaded with the desired contents, and follow the previous examples, you can:
Start the master 1 (GO):
Start the masters 1, 3 & 4 (GOs):
Start the effect 1 loaded in the master 25:
Fade the master 3 up to the desired level:
Remember, the remote has the special function: m
outputs of all masters (masters at 0%), and return to the known status.
PAG 1 assg
CUE 1 thru 2 3 assg
CUE thru assg
PAG 1 load
CUE 1 thru 1 2 load m 01 ENT
EFFECT 1 load m 01 2 5 ENT
m 01 ENT
m 01 ENT,
or m 01 ENT, m 01 3 ENT, m 03 4 ENT
m 01 2 5 ENT
m 01 3
. This function allows you to eliminate the scene
LEVITON 8700 SERIES
ENT,
ENT
Advertisement
Table of Contents
