Table of Contents
Advertisement
OPERATION
Pairing the Subwoofer to the Soundbar
Note: Before connecting the AC power, ensure that the power supply voltage
corresponds to the voltage printed on the back or the underside of the product.
1.
Insert the DC plug of the AC-DC power adaptor into the DC Power Input on the
bottom of the soundbar and then connect the AC-DC adapter to a convenient
power outlet.
2.
Press the
will show the last used mode.
3.
Plug the connector of the power cord into the AC socket on the back of the
subwoofer and plug it into the main power supply.
4.
Turn on the subwoofer by pressing the Power On/Off switch. The Pairing Indicator
will flash blue.
5.
To pair the subwoofer and the soundbar, press and hold the
on the remote control for about 5 seconds. You can see the "PAIRING" message
on the display, and it is ready for pairing with the subwoofer or surround speaker.
6.
Press and hold the Pair button (around 5 seconds) on the back of subwoofer within
15 seconds after the "PAIRING" appears on the soundbar, the Pairing Indicator on
the back of subwoofer will be changed to steady blue, indicating the connection is
successfully established.
7.
Repeat step 5 and then press and hold the Pair Button (around 5 seconds) on the
back of main surround speaker within 15 seconds after the "PAIRING" appears, the
Pairing Indicator on the front of main surround speaker will be changed to steady
blue, indicating the connection is successfully established.
Note: If the subwoofer or the main surround speaker has been paired with the soundbar
once, the units will connect automatically in the subsequent use.
button to switch on the soundbar. The LED display will light up and
SOURCE button
Advertisement
Table of Contents
