Advertisement
OPERATION
1.
Make sure you have made all the necessary cable connections before connecting
the soundbar to a wall outlet. Once connected to power, the soundbar will enter
standby mode and the indicator will light up in red.
2.
Insert a AAA battery into the remote control to activate it.
Note:
The remote control works within a range of 6 metres.
3.
Short press the Power/Source button on unit or the remote control to turn on the
soundbar. The Bluetooth indicator will light up.
4.
Press the Power/Source button on the unit or Mode/Mute on the remote control to
choose the desired source.
1. Bluetooth Mode
After powering on, the soundbar will enter Bluetooth mode directly. You can also select
Bluetooth mode as described above.
1.
Place the audio source device (smartphone, etc.) within 3 meters of the soundbar.
2.
Activate the Bluetooth function of the audio source device, so that it starts to
search for nearby Bluetooth devices (refer to the device's instructions for details).
3.
Select "KASBD21DWSA" from the discovered device list and click to connect.
4.
If the device asks for a password, enter "0000" and press confirm button to pair the
device with the soundbar.
5.
Make sure that the distance between the soundbar and phone is less than 10m
and there are no obstacles in the space. Music can now be played through the
soundbar over Bluetooth.
6.
Short press the Play/Pause button to play and pause music. Short press the
Previous or Next buttons to play the previous or next song.
7.
To disconnect, short press or long-press the Bluetooth button on the soundbar. At
this time, another mobile phone device can be used to connect Bluetooth playing.
If another connection is not selected, the soundbar will remain discoverable over
Bluetooth until it is powered off or another mode is selected.
Advertisement
