Cleaning And Care - Kogan KASBD513MA User Manual

5.1ch 200w dolby soundbar with wireless subwoofer & rear speakers
Table of Contents

Advertisement

USB Playback
1.
Press the
SOURCE button on the soundbar or remote control to select the USB mode.
2.
Connect a USB storage device directly into the port, after a few seconds, it will
start playing music automatically.
3.
Press the
Note: During any input mode, if you plug a USB storage device into the soundbar,
the input mode will automatically change to USB playback mode.

CLEANING AND CARE

Care and Maintenance
Do not subject this product to excessive force, shock, dust, or extreme
temperature.
Do not tamper the internal components of the product.
Avoid leaving this product in direct sunlight or hot, humid, or dusty places.
Keep this product away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
Cleaning the Product
To prevent fire or shock hazard, disconnect this product from the AC power source
when cleaning.
The product may be cleaned with a dust cloth. Be careful when cleaning and
wiping the plastic parts.
If the cabinet becomes dusty, wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
Caution: Never allow any water or other liquids to enter the product while cleaning.
button to switch on the soundbar. While in this mode, press the
or
button on the remote control to skip to the previous or next track.

Advertisement

Table of Contents
loading

Table of Contents