Advertisement
OPERATION
Input Functions
Power on/off: Press the Power on/off button on the remote control or soundbar
•
control panel to turn the unit on and off.
•
HDMI (ARC): Connect an HDMI ARC compatible device to the HDMI (ARC) port on
the soundbar using an HDMI cable (not supplied). Select HDMI (ARC) mode either by
pressing the HDMI (ARC) button on your remote control, or repeatedly pressing the
Mode button on the soundbar control panel until "ARC" is displayed on the LED
display. Ensure HDMI ARC is selected as the TV's audio output (check your TV's
settings), then adjust the volume of soundbar using the soundbar's remote control or
control panel.
Auxiliary in: Connect a compatible device using the supplied 3.5mm cable. Select
•
auxiliary mode either by pressing the "AUX" button on your remote control or
repeatedly pressing the Mode button on the soundbar control panel until "AUX" is
displayed on the LED display. Ensure the connected device is producing an audio
signal, then adjust the volume of soundbar using the volume up and volume down
buttons on the remote control or soundbar control panel.
•
Optical in: Connect a compatible device to the optical input on the soundbar using a
digital optical cable (not supplied). Select optical mode either by pressing the "OPT"
button on your remote control or repeatedly pressing the Mode button on the soundbar
control panel until "OPT" is displayed on the LED display. Ensure Optical SPDIF is
selected as the TV's audio output, then adjust the volume of the soundbar using the
volume up and volume down buttons on the remote control or soundbar control panel.
Coaxial in: Connect a compatible device to the coaxial input on the soundbar using a
•
digital coaxial cable (not supplied). Select coaxial mode by repeatedly pressing the
Mode button on the soundbar control panel until "COA" is displayed on the LED
display. Ensure Coaxial is selected as the TV's audio output, then adjust the volume of
the soundbar using the volume up and volume down buttons on the remote control or
soundbar control panel.
•
Bluetooth: Press the "BT" button on the remote control or repeatedly pressing the
Mode button on the soundbar control panel until BT is shown on the LED display. The
LED display will flash to indicate that the soundbar is in Bluetooth pairing mode.
Ensure that the device you wish to connect is also in pairing mode and search for
"Kogan 100W Dolby SB" in its device list. When the two devices are paired, the LED
display on the soundbar will remain solidly lit. The soundbar will now automatically re-
pair with this device whenever it is within range and has Bluetooth turned on.
Notes: Long-press the BT button on the remote control to disconnect
or reconnect the Bluetooth between the phone and the soundbar.
Advertisement
