Table of Contents
Advertisement
Select Different Input Mode
Press the
SOURCE button on the soundbar or the remote control to cycle through the
available Input modes.
Note: When the soundbar is idle and no input signal is received for 15 minutes, the
soundbar will automatically switch to standby mode.
Playback with a Bluetooth Device
This product offers you the possibility to use a Bluetooth enabled device. The operational
range is limited to approximately 10 metres depending on the surroundings and the device
used.
Preparing Devices for Pairing
Before using this product with a compatible device, such as a mobile phone, for the first
time, you must pair and connect it to the device.
1.
Press the
SOURCE button to select the Bluetooth mode. "BT" flashes to show that the
pairing mode is activated.
2.
Ensure the Bluetooth function is activated in your device (e.g. mobile phone).
Pairing the Devices
1.
If you have not paired the soundbar with a device or the paired devices list is
empty, pairing mode is activated.
2.
Activate Bluetooth on the compatible device and set it in the search mode.
3.
In your device, select the speaker name "KASBD513MA" from the list of found
devices.
Note: Only one device can be connected to the speaker. If the speaker is
already connected to another device, it will not appear in your device's
Bluetooth selection list.
4.
If your device asks for a passkey (depends on the device model and software
version), then enter digits "0000" (four zeros) and press OK.
Input Mode
HDMI IN-1
HDMI IN-2
ARC (HDMI)
Bluetooth
Optical Input
Coaxial Input
Auxiliary Input (3.5mm) AUX
USB
button to switch on the soundbar. While in this mode, press the
Display
HD-1
HD-2
ARC
BT
OPT
COX
USB
Advertisement
Table of Contents
