Advertisement
OPERATION
Wireless subwoofer connection
Notes: The soundbar will come with the subwoofer pre-paired. Follow the below
steps if it is not connected, or if you have disconnected and require reconnection.
•
Power on both the Soundbar and Subwoofer. The subwoofer's LED light will be flashing
continuously if not connected. Set the soundbar to Bluetooth mode ("BT" will show on
the LED display).
•
Hold the Play/Pause button for at least 3 seconds, until the display shows "PAIR". The
subwoofer and soundbar will automatically begin pairing. The first connection can take
10 seconds or more.
•
When connected successfully, the soundbar will make a chime sound, and the
subwoofer's LED will remain solidly lit.
Input Functions
•
Power on/off: Press the Power on/off button on the remote control or soundbar control
panel to turn the unit on and off.
•
HDMI (ARC): Connect an HDMI ARC compatible device to the HDMI (ARC) port on
the soundbar using an HDMI cable (not supplied). Select HDMI (ARC) mode either by
pressing the HDMI (ARC) button on your remote control, or repeatedly pressing the
Mode button on the soundbar control panel until "ARC" is displayed on the LED
display. Ensure HDMI ARC is selected as the TV's audio output (check your TV's
settings), then adjust the volume of soundbar using the soundbar's remote control or
control panel.
•
Auxiliary in: Connect a compatible device using the supplied 3.5mm cable. Select
auxiliary mode either by pressing the "AUX" button on your remote control or
repeatedly pressing the Mode button on the soundbar control panel until "AUX" is
displayed on the LED display. Ensure the connected device is producing an audio
signal, then adjust the volume of soundbar using the volume up and volume down
buttons on the remote control or soundbar control panel.
•
Optical in: Connect a compatible device to the optical input on the soundbar using a
digital optical cable (not supplied). Select optical mode either by pressing the "OPT"
button on your remote control or repeatedly pressing the Mode button on the soundbar
control panel until "OPT" is displayed on the LED display. Ensure Optical SPDIF is
selected as the TV's audio output, then adjust the volume of the soundbar using the
volume up and volume down buttons on the remote control or soundbar control panel.
•
Coaxial in: Connect a compatible device to the coaxial input on the soundbar using a
digital coaxial cable (not supplied). Select coaxial mode by repeatedly pressing the
Mode button on the soundbar control panel until "COA" is displayed on the LED
Advertisement
