Problems With Your Beverage Cooler; Troubleshooting Guide; Circuit Diagram - Vinotemp VT-PARTYCOOLER Owner's Manual

PROBLEMS WITH YOUR BEVERAGE COOLER

You can easily solve many common beverage cooler problems, saving you
the cost of a possible service call. Try the suggestions below to see if you
can solve the problem before contacting Vinotemp at info@vinotemp.com.

TROUBLESHOOTING GUIDE

PROBLEM POSSIBLE CAUSE
Beverage
cooler does not
operate
Beverage
cooler is not
cold enough
Lid will not
close properly
1 7 6 3 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
Not plugged in.
Using wrong voltage.
The circuit breaker tripped or there is a blown fuse.
Check the temperature control setting.
Check that the interior fan is operating and not
blocked.
Check that the unit is not touching other appliances
that cause vibrations.
The condenser needs to be cleaned.
The unit is not on leveled floor.
The lid is opened too often.
The lid is not closed completely.
The lid seal does not seal properly.
The beverage cooler is not level.
The beverage cooler is too full.
The seal is weak.

CIRCUIT DIAGRAM

i n f o @ v i n o t e m p . c o m
9