Operating Your Wine Cooler - Vinotemp element EL-28TS Owner's Manual

28-bottle wine cooler
Table of Contents

Advertisement

OPERATING YOUR WINE COOLER

OPERATING INSTRUCTIONS
1. Gently place/slide the racks into the wine cooler.
2. Determine the best temperature setting to use.
3. Place bottles inside the wine cooler.
4. Plug the power cord into a standard grounded electrical outlet.
5. Limit the frequency of opening the door to conserve energy and maintain proper storage temperature.
6. Turn the interior light on and off by touching the button labeled with a light on the control panel.
Important: When using the wine cellar for the first time, please allow at least 24 hours for the internal temperature to
adjust properly. Make sure at least three to five bottles are in the unit.
Your wine cooler has a touch screen control panel on the upper part of the glass door.
SETTING A TEMPERATURE
You can manually adjust the temperature inside your wine cooler. Simply press the "Down" arrow button on the
control panel to decrease the temperature and the "Up" arrow button to increase the temperature by 1 degree
increments. The temperature range for this unit is from 39°F (4°C) to 65°F (18°C).
LIGHT
To turn the interior light on/off, simply press the light button on the control panel.
UP
Press to raise (warm) the set temperature by 1°C or 1°F.
DOWN
Press to lower (cool) the set temperature by 1°C or 1°F.
°F/°C Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To switch the temperature display from
Fahrenheit to Celsius or from Celsius to Fahrenheit, simply press the F/C button on the control panel.
NOTE: When using the unit for the first time or after a long period of inactivity, there may be a variance of a few degrees
between the selected temperature and the temperature indicated on the LED readout. This is normal due to the length of
inactivity, and will correct itself after the unit is run for a few hours. If the unit is unplugged, has lost power or is turned off,
wait 3 to 5 minutes before restarting the unit. The unit will not restart before this time delay.
10
TEMPERATURE CONTROL

Advertisement

Table of Contents
loading

Table of Contents