Table of Contents
Advertisement
OPERATING YOUR WINE COOLER
The wine cooler should be placed in a position where the ambient temperature is between 5-38
humidity level is between 45 -90%. If the position is above or below this range, the performance of the
unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior
temperature to fluctuate.
NOTE:
l
When you use the wine cooler for the first time or restart the wine cooler after having been
shut off for a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the
beverage cooler is running for a few hours everything will be back to normal.
l
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit.
If you attempt to restart before this time delay, the wine cooler will not start.
The controls of your wine cooler
°
C/41- 100°F
11
Advertisement
Table of Contents
