Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Before Using Your Appliance:
Remove the exterior and interior packaging.
Before connecting the appliance to the power source, let it stand
upright for approximately 24 hours. This will reduce the possibility
of a malfunction in the cooler system from handling during
transportation.
Installation of Your Appliance:
This unit is shipped ready for use.
Place your beverage cooler on a leveled floor that is strong enough
to support it when it is fully loaded.
Choose a well-ventilated area with temperatures ≤90°F.
Side shelves can support up to 9 lbs each and display basket can
support 4.41 lbs.
NOTE: Designed for indoor and outdoor operation. The appliance should
not be located next to sources of high heat or in direct sunlight.
OPERATING YOUR BEVERAGE COOLER
Power – Temperature control knob is located beneath
the cabinet. To turn off the cooler, rotate the knob
clockwise until you hear a "click" sound. This means
the unit is no longer powered.
Colder – To lower the internal temperature, rotate the
temperature control knob clockwise.
Warmer – To raise the internal temperature, rotate the temperature
control knob counterclockwise.
NOTE: Temperature control range is 36-46°F.
1 7 6 3 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
7
Advertisement
Table of Contents
