Problems With Your Wine Cellar: Troubleshooting Guide - Vinotemp VT-12TEDI Owner's Manual

PROBLEMS WITH YOUR WINE CELLAR
You can solve many common wine cellar problems easily, saving you the
cost of a possible service call. Try the suggestion below to see if you can
solve the problem before contacting Vinotemp at info@vinotemp.com
TROUBLESHOOTING GUIDE
PROBLEM
Wine cellar does not
operate
Wine cellar is not cold
enough
Light does not work
Vibrations
Wine cellar seems to
make too much noise
Door will not close
properly
Temperature LED does
not display
Temperature LED
display error
Buttons are not
functional
Supply cord is
damaged
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
POSSIBLE CAUSE
• Not plugged in
• Using wrong voltage
• The circuit breaker tripped
• Blown fuse.
• Check the temperature control setting, external
environment may require a cooler setting.
• The door is open too often.
• The door is not closed completely.
• The door seal does not seal properly.
• The wine cellar does not have the correct
clearance at the back and two sides.
• Call the service center.
• Check to see that the wine cellar is level.
• The wine cellar is not level.
• Check the fans inside the cabinet and at the
back of the unit
• The wine cellar is not level.
• The seal is weak.
• The shelves are out of position.
• Main control board does not work.
• Temperature controller problem.
• There is some problem with the plug (no power
supply)
• Temperature sensor is cut off.
• Temperature controller panel is damaged.
• Cord must be replaced by the manufacturer, its
service agent or a similarly qualified person in
order to avoid a hazard
i n f o @ v i n o t e m p . c o m
13