Care And Maintenance; Moving Your Wine Cooler; Problems With Your Wine Cooler - Vinotemp VT-8TEDTS-ID Owner's Manual

CARE AND MAINTENANCE

• Always unplug the unit before cleaning or performing maintenance.
• Never use harsh cleansers or scouring pads to clean any part of the
unit.
• Turn off the power, unplug the appliance and remove all items
including shelves.
• Clean the inside surfaces with a warm water and baking soda
solution. The solution should be about 2 tablespoons of baking soda
to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth before cleaning
control panels or any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.
Defrosting:
• The unit defrosts automatically.
• The evaporator behind the rear wall of the unit defrosts
automatically.
• The condensation collects in the drainage channel behind the rear
wall of the unit. It flows through the drainage hole into the drip tray
by the compressor where it evaporates.

MOVING YOUR WINE COOLER

Before moving your wine cooler, first be sure to remove all items from the
cooler.
• Securely tape down any loose items, such as shelves, inside the unit.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Ensure that the unit stays securely in the upright position during
transportation. Protect the outside of the appliance with a blanket or
similar item.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
9