Table of Contents
Advertisement
Optional Settings - Feature Table
FEATURE
DESCRIPTION
01
Temperature Format
02
Switching Di erential
03
Output Delay
04
Up/Down Temperature Limit
05
Sensor Selection
06
Floor Temperature Limit
07
Optimum Start
08
Rate of Change
09
Program Mode
10
(DST) Daylight Saving
11
Program Type
23
SETTING
00 = °C, 01 = °F (00 = Default)
00 = 0.5°C, 01 = 1.0°C (Default) 02 = 2.0°C, 03 = 3.0°C
00 - 15 Minutes (00 = Default)
00° - 10°C (00° = Default)
00 = Built in Sensor (Default)
01 = Floor Sensor Only
02 = Built in Sensor with Floor Sensor
20°C – 45°C (28°C Default)
00 = Disabled (Default) 01 = 1 Hour 02 = 2 Hours
03 = 3 Hours 04 = 4 Hours 05 = 5 Hours
Information Only
00 = 5/2 01 = 7 Day 02 = 24 Hour
03 = None programmable
00 = Disabled (Default) 01 = Enabled
00 = 4 Comfort Levels (Default)
01 = 6 Comfort Levels
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UFHPROGW and is the answer not in the manual?
Questions and answers
One of my wall thermostats is stuck. Won't edit. Has hand with finger pointing up
The Polypipe UFHPROGW thermostat may be locked if it shows a hand with a finger pointing up. To fix this, try the following steps:
1. Press and hold the Left/Right keys to navigate to the Power Icon.
2. Press and hold the button to turn the display OFF.
3. Press and hold the Down key together with the other relevant key for 10 seconds.
4. The current temperature should appear on the display.
5. If editable, use the Up/Down keys to adjust the settings.
6. Press the confirm button to save changes, and the display should go blank.
If the thermostat remains unresponsive, check the installation and wiring, ensuring it complies with the provided wiring diagrams.
This answer is automatically generated