Table of Contents
Advertisement
Frost Protection
Frost Protection
Use the 'Left/Right' keys to scroll to the 'Power Icon' ...................................................
Use the 'Left / Right' keys to scroll to the 'Power Icon' .....................................................
The frost icon will toggle ON/OFF each time
The frost icon will toggle ON/OFF each time
In this mode, the edge-e will display the frost icon and will only turn the heating 'ON'
In this mode, the thermostat will display the frost icon and will only turn the heating 'ON'
should the room temperature drop below the set frost temperature. If the heating is
should the room temperature drop below the set frost temperature. If the heating is
turned 'ON' whilst in frost mode
turned 'ON' whilst in frost mode, the ame symbol will be displayed.
To cancel the frost protect mode, navigate to the 'Power Icon' again, then press
To cancel the frost protect mode, navigate to the 'Power icon' again and press
Frost Protection Symbol
is pressed ...........................................................
is pressed ....................................................
ame symbol will be displayed.
Model: UFHPROGW
..........
................
18
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UFHPROGW and is the answer not in the manual?
Questions and answers
One of my wall thermostats is stuck. Won't edit. Has hand with finger pointing up
The Polypipe UFHPROGW thermostat may be locked if it shows a hand with a finger pointing up. To fix this, try the following steps:
1. Press and hold the Left/Right keys to navigate to the Power Icon.
2. Press and hold the button to turn the display OFF.
3. Press and hold the Down key together with the other relevant key for 10 seconds.
4. The current temperature should appear on the display.
5. If editable, use the Up/Down keys to adjust the settings.
6. Press the confirm button to save changes, and the display should go blank.
If the thermostat remains unresponsive, check the installation and wiring, ensuring it complies with the provided wiring diagrams.
This answer is automatically generated