Table of Contents
Advertisement
Locking the Thermostat
UFHPROGW
The
has a keypad lock facility. To activate the lock follow these steps.
• Use the 'Left/Right' keys to scroll to Hold & press
The display will show 0000. At this point enter a four digit pin number.
• Use the 'Up/Down' keys to enter values ..............................................................................
• Use the 'Left/Right' keys to move between digits ...........................................................
• Press
to con rm .............................................................................................................................
The display will return to the main screen and display the keypad lock indicator....
Note: The keypad lock indicator is only displayed when the lock is active.
Unlocking the Thermostat
UFHPROGW
• To unlock the
The display will show 0000. At this point enter the four digit pin number you set previously.
• Use the 'Up/Down' keys to enter values ...........................................................................................
• Use the 'Left/Right' keys to move between digits ......................................................................
• Press
to con rm ............................................................................................................................... . ...............
The display will unlock and return to the main screen.
19
press
once.............................................................................................
for 7 seconds .........................
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UFHPROGW and is the answer not in the manual?
Questions and answers
One of my wall thermostats is stuck. Won't edit. Has hand with finger pointing up
The Polypipe UFHPROGW thermostat may be locked if it shows a hand with a finger pointing up. To fix this, try the following steps:
1. Press and hold the Left/Right keys to navigate to the Power Icon.
2. Press and hold the button to turn the display OFF.
3. Press and hold the Down key together with the other relevant key for 10 seconds.
4. The current temperature should appear on the display.
5. If editable, use the Up/Down keys to adjust the settings.
6. Press the confirm button to save changes, and the display should go blank.
If the thermostat remains unresponsive, check the installation and wiring, ensuring it complies with the provided wiring diagrams.
This answer is automatically generated