Table of Contents
Advertisement
Setting the Time and Date
To set the clock, follow these steps.
• Use the 'Left/Right' arrow keys to highlight
button for 3 seconds .......................................................................................................................
At this point the screen will go blank showing only 'SETUP' and 'CLOCK' .
• Tap the 'Up' followed by 'Right' keys to highlight 'CLOCK' ........................................................
• Press
to con rm selection ('Hour' digits will now ash) .....................................................
• Use the 'Up/Down' arrow keys followed by
• Use the 'Up/Down' arrow keys followed by
Repeat the previous two steps to set the date ('Day, Month & Year').
Display will go blank once completed.
• Press the 'Down' arrow key followed by
then press and hold the
to set the 'Hours' .........................................
to set the 'Minutes' ...................................
to return to the main display .......................
Model: UFHPROGW
12
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UFHPROGW and is the answer not in the manual?
Questions and answers
One of my wall thermostats is stuck. Won't edit. Has hand with finger pointing up
The Polypipe UFHPROGW thermostat may be locked if it shows a hand with a finger pointing up. To fix this, try the following steps:
1. Press and hold the Left/Right keys to navigate to the Power Icon.
2. Press and hold the button to turn the display OFF.
3. Press and hold the Down key together with the other relevant key for 10 seconds.
4. The current temperature should appear on the display.
5. If editable, use the Up/Down keys to adjust the settings.
6. Press the confirm button to save changes, and the display should go blank.
If the thermostat remains unresponsive, check the installation and wiring, ensuring it complies with the provided wiring diagrams.
This answer is automatically generated