Configuring Nos Authentication On The Ras 1500 - 3Com 3C421600A Management Manual

192 C 12: U
HAPTER SING
Configuring NOS
Authentication on
the RAS 1500
S A
ECURITY AND CCOUNTING
Complete the following procedures to configure NOS authentication on
the RAS 1500. You can also use Web Configuration Interface to configure
NOS authentication. Refer to the Web Configuration Interface online help
for more information.
Setting NOS Authentication Parameters
Use the following steps to configure NOS authentication:
1 Set NOS authentication:
set authentication type nos
2 Configure the primary NOS authentication server:
set authentication primary_server [domain name or ip address]
primary_port 888 primary_secret 3com
The industry standard port setting for NOS authentication server is 888.
Your NOS authentication server may differ. If you want to change the
primary_secret, refer to the readme file provided with the Security
application.
3 Configure the secondary NOS authentication server:
set authentication secondary_server [domain name or ip
address]
secondary_port 888 secondary_secret 3com
The industry standard port setting for NOS authentication server is 888.
Your NOS authentication server may differ. If you want to change the
secondary_secret, refer to the readme file provided with the Security
application.
4 Configure the number of server retransmissions:
set authentication retransmissions [0-100]
5 Configure PPP parameters:
set ppp receive_authentication pap
6 Save your work:
save all
Enabling and Disabling Remote Authentication
Remote authentication is enabled by default. To set the type of remote
authentication (RADIUS or NOS), see the previous procedure,
"Configuring RADIUS Authentication Settings."