Before You Begin; Required Information; Optional Information; Configuring Your System For Dialout/Ip Software - 3Com 3C421600A Management Manual

50 C 4: C
HAPTER ONFIGURING

Before You Begin

Required Information

Optional Information

Configuring Your
System For
DialOut/IP
Software
D O /IP
IAL UT
Before you configure DialOut/IP, you need to obtain some system
information and confirm some basic configuration of the RAS 1500 and
the network computers.
The following information is required:
System name of the RAS 1500
MAC address of the RAS 1500
IP address of the RAS 1500
IP network name
Network service name
The following information is optional:
Modem group name
Modems to include in the modem group
The RAS 1500 includes DialOut/IP software for Windows
computers. DialOut/IP allows the RAS 1500 modems to be shared for
dialing out. However, the RAS 1500 is not configured "out of the box" to
support dial-out.
Setting up your system for dial-out through the RAS 1500 using
DialOut/IP software requires two general steps:
1 Configure the RAS 1500.
2 Configure client workstations.
These steps are detailed below.
®
95/98/NT