Step Four: Add The Dial-Out Service - 3Com 3C421600A Management Manual

Step Four: Add the
Dial-out Service
For example, to add a modem group called Telnet_users with three
modems assigned to it:
add modem_group telnet_users interface
rm0/slot:1/mod:1,rm0/slot:1/mod:2,rm0/slot:1/mod:3
After you create the modem group, you assign it to the dial-out service
(in step four). The modem group you assign in that step must match
exactly (case-sensitive) with the modem group you create in this step.
1 Add the Telnet dial-out service. Use the following command:
add network service <service name>
server_type <server type>
socket <socket number>
data <ancillary data>
Table 9 Network Service Parameters
Parameter
network service name Name of the service. Limit: 64 ASCII characters.
server type
socket number
Configuring the RAS 1500
Description
Designates the type of service, which in this case is
telnetd.
Port on which the server monitors for activity. This
parameter should be higher than 1024 to avoid
conflicts with existing socket numbers.
63