Configuring The Management Module; Before You Start - 3Com 3C16080 User Manual

3
You need to configure the SuperStack
Management Module before you can use it. The Management
Module has a Command Line Interface (CLI) that you can access by
connecting the module to a terminal or a computer with a terminal
emulation program directly or via a modem.
The CLI provides initial configuration of the Management Module.
To manage the Superstack II Advanced RPS, you can use 3Com
Transcend or another SNMP network manager.

Before You Start

If your network has a BootP server configured to respond, the
Management Module will solicit its addresses automatically.
Otherwise, make sure you ask your network administrator to
supply the following values. Space is provided for you to record
these values for future reference.
IP address:........................................................................................
Subnet mask:....................................................................................
Default Router:..................................................................................
SLIP address:.....................................................................................
SLIP mask:.........................................................................................
C
ONFIGURING
M
ANAGEMENT
T
HE
M
ODULE
II Advanced RPS
®