46
C
3: U
HAPTER
Table 5 Command Line Interface Commands (continued)
Command
unit
Commands
The remaining sections in this chapter describe the management
functions that can be carried out from the command line interface.
Changing the Password
We recommend that setting a password is the first task you carry out
on the unit. Setting a password prevents unauthorized management
access to the unit or stack.
If you forget your password while logged out of the hub, refer to
"Solving Problems With the Command Line Interface"
To set a new password or change an existing password:
1 At the top-level menu, enter:
system password
2 You are prompted for your old password:
Old password:
If there is no current password, press Return without entering any
text. If you already have a password set up, then enter the password.
3 The prompt changes to show:
Enter new password:
Enter your new password. The prompt asks you to confirm your new
password by entering it again.
The command line interface displays a message to tell you that your
password has successfully changed.
Configuring Other System Parameters
You can display and change information about the Hub units in the
stack, or the stack as a whole, using the commands on the System
menu.
C
SING THE
OMMAND
What does it do?
Moves the focus of the command line
interface to another unit in the stack.
L
I
INE
NTERFACE
Described
on...
page 50
on
page
106.