Table of Contents
Advertisement
ED8400 Series
Vertical Rod Exit Devices
Installation Instructions
2
Door Preparation (cont .)
a
Mark Centerlines (cont .)
Screw Chart
Various factors prevent recommendation of drill sizes for screws and sex nuts; such as type of door and
frame construction. Thickness and type of metal, etc. can affect the final hole diameter and resulting
holding strength of the fastener.
Item
Top Strike
Top and Bottom Latch
Top Latch Cover
Top and Bottom Rod Guides
Front Plate Assembly and Rear Bracket
Front Bar Insert
Rear Cover
Bottom Latch Cover
Bottom Strike
b
Spot and Drill Template Holes
Using template furnished, spot and drill mounting holes for trim (if furnished),
and device. Be sure the template is aligned with horizontal and vertical
centerlines on the inside of door.
Note:
If your door has cylindrical lock cutout for ANSI/BHMA A156.115 prep
doors:
A.
B.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2011, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Extend horizontal and vertical centerlines of ANSI /BHMA cutout as shown at
right.
Align ANSI/BHMA cutout centerlines on template with centerlines on door.
Spot and drill holes as needed.
Qty . Fastener
12-24 x 1/2" Lg. Pan Head Machine Screw or #12 x 1-1/4" Lg. Round
2
Head Wood Screw
1/4-20 x 3/4" Lg. Binding Head Machine Screw and Sex Nut P/N
2
101F74 or #14 x 3/4" Lg. Pan Head Wood Screw
1/4-20 x 1-7/8" Lg. Oval Head Machine Screw and Sex Nut P/N
1
101F74 or #14 x 2-1/4" Lg. Oval Head Wood Screw
4
#8 x 3/4" Lg. Round Head Tapping Screw Type "A"
12-24 x 3/4" Lg. Pan Head Machine Screw and Sex Nut P/N 376F37
4
or #12 x 1-1/4" Lg. Pan Head Tapping Screw Type "A"
1
1/2" Lg. Pan Head Tapping Screw
1
1" Lg. Flat Head Screw with Washer
1/4-20 x 2" Lg. Oval Head Tapping Screw Type "F" or #14 x 2-1/4" Lg.
1
Oval Head Wood Screw
1/4-20 x 5/8" Lg. Flat Head Machine Screw and Anchors P/N 361F30
2
or #14 x 1-1/4" Lg. Flat Head Wood Screw
Figure 4
5
FM22 06/19
Advertisement
Table of Contents
