CAUTION: DO NOT DRY SUB-ASSEMBLIES WHICH CONTAIN PRESS-FITTED PARTS IN
(c)
Dry the part in hot air, between 100 °C and 110 °C (212 °F to 230 °F).
E.
Close-up
Not applicable
The document reference is online, please check the correspondence between the online documentation and the printed version.
COMPONENT MAINTENANCE MANUAL
00001059
THE TEMPERATURE RANGE GIVEN BELOW. THIS CAN CAUSE RISKS OF
DISTORTION, OR INTERNAL CORROSION. USE THE CORRECT DRYING
TEMPERATURE.
21-22-91
Page 4006
Dec 15/06