DSX Mode Test Access
T1 BERT
DSX MON, Rx from Customer
The Rx of the BERT receives data from the
jack impedance of 432 ohms and comes from the customer originated data. The
used. This test is non-intrusive.
T1 BERT
DSX EQ, Tx to Customer, Rx from Customer
The Tx of the BERT goes to the
(Figure
C-3). The
TX EQ
BERT is data from the customer. The
and
direct connections. This test is intrusive, as it connects the
RX
from the customer data.
C-2
HDSL2 for General Distribution Installation and Maintenance Practice
TX
X
RX
MON
Figure C-1. DSX MON, Tx to Customer
RX MON
TX
X
RX
MON
Figure C-2. DSX MON, Rx from Customer
jack, and the Rx of the BERT goes to the
TX EQ
data from the BERT is sent to the customer. The
jack
MON
TX
DSX
EQ
RX
432 Ω
TX
DSX
RX
432 Ω
jack
(Figure
C-2). This data has a monitor
TX
DSX
EQ
RX
432 Ω
TX
DSX
RX
432 Ω
and
are 432 ohm replicas of the
TX
RX
To MUX
From MUX
To DSX
From DSX
To CUST
From CUST
BERT TX
To MUX
From MUX
To DSX
From DSX
To CUST
From CUST
jack
RX EQ
data to the
RX EQ
jacks directly to and
EQ
61223HDSL2L2-5B
is not
EQ TX