3Com NBX 100 Installation Manual page 148

148 C 5: A
HAPTER NALOG
D
EVICES
To verify that the NBX system properly discovered the ATA:
1 Log in to the NBX NetSet utility using the administrator username and
password.
2 Click
Telephone Configuration > ATA
3 Use the MAC address that you recorded prior to installing the ATA to
identify it in the list. The MAC address on the ATA and the MAC address
displayed in the list on the ATA tab should be identical.
Use the status lights on an ATA to help verify that the ATA has been
properly discovered:
For information on the status light of the ATA port of an NBX V3000,
see page 22.
For information on the status light of the ATA 3C10400B, see
page 51.
.