Managing Off-Site Notification Using The Telephone; Do Not Disturb - 3Com 3C10399A User Manual

56 C 5: P
HAPTER ERSONALIZING
Managing Off-site
Notification Using the
Telephone

Do Not Disturb

Y T
OUR ELEPHONE
Resetting the Off-Site Notification Cycle
When you log in to your voice mailbox and hang up or log out (regardless
of whether you listen to or delete messages), you start the off-site
notification cycle again. You will be notified about the next message that
comes into your voice mailbox.
To manage your off-site notification settings directly through the
telephone:
1 Log in to your voice mailbox at your telephone or remotely.
2 Press 9.
3 Press 4, select one of these options, and follow the prompts:
Button Description
1 Enable off-site notification.
2 Disable off-site notification.
3 Change off-site notification settings.
4 Review current off-site notification settings.
* Return to the main menu.
When the Do Not Disturb feature is in effect, calls coming in to your
telephone immediately go to your default call coverage point without
ringing. You set the default call coverage point by logging in to NBX
NetSet > User Information > Call Forward Default. See
Incoming Calls" in
If Call Forward All is in effect, it overrides Do Not Disturb. Calls go to the
call coverage point defined for Call Forward All in NBX NetSet > User
Information > Call Forward Override.
You can use the Feature Code to enable and disable the feature.
When Do Not Disturb is in effect:
It overrides Call Forward No Answer, Call Forward Busy, and FWD
MAIL.
Your telephone does not ring when it receives an incoming call.
You can use the telephone to dial outgoing calls.
Chapter 4.
"Forwarding