Starting A Whisperpage Session - 3Com 3103 User Manual

Starting a
WhisperPage Session
manager or the third party and the third party cannot hear the comments
of the assistant.
If the manager is not on an active call when the assistant starts a
WhisperPage session, the call is placed just as if the assistant dialed the
manager's extension.
Both the manager and the assistant in a WhisperPage session must be
assigned to an NBX WhisperPage domain and have appropriate
WhisperPage access privileges.
To view your WhisperPage access privileges, log in to the NBX NetSet
Utility and go to System Group Settings > WhisperPage. This page
reports the following information:
Whether or not the WhisperPage alert tone is enabled.
The period of time in seconds (called decline time) before an initiated
WhisperPage session becomes active.
Users (listeners) with whom you can initiate a WhisperPage session
Users (speakers) who can initiate a WhisperPage session with you
The NBX NetSet administrator can enable or disable the alert tone and
specify the Decline Time, which ranges from 0 to 9.9 seconds. For
additional tips and considerations on using WhisperPage, see
About WhisperPage"
To start a WhisperPage session using a 3Com Manager's Telephone:
1 Pick up the handset.
2 Press the Features soft button.
3 Scroll to Whisper.
4 Press Select.
The display panel prompts you for the WhisperPage extension.
5 Enter the extension you want to whisper to.
If the listener's telephone has a display panel, it shows the WhisperPage
attempt and your extension. Additionally, an optional tone may be played
to alert the listener.
later in this chapter.
WhisperPage 105
"More