Figure 2. Generic DLC50 Microwave System
Use of a BMS Power Voltage Relay (PVR) to distribute power to the microwave equipment enables the
power switch on the DLC50 to control power to all attached devices. The PVR also provides a separate
switched power connection for an external Power Amplifier (PA).
The DLC50 is available in the models shown in Table 1. Any of these models may be used as a drop-in
replacement for HCP50-II controllers when used with adapter cable 7314395012.
Table 1. DLC50 Models
BMS P/N
8714395000
8714395001
8714395002
8714395003
The DLC50 switches and ports are defined in Table 2.
The document reference is online, please check the correspondence between the online documentation and the printed version.
DLC50 Control Panel Installation and Operation Manual | Doc. No. 6051439500 Rev. A
Model
Number
Downlink Control Panel with Antenna actuator switch. Drop-in replacement
DLC50-A
for the HCP-50-II using accessory adaptor cable (sold separately).
Downlink Control Panel with Antenna actuator switch and NVIS-B
DLC50-AN
compatibility. Drop-in replacement for the HCP-50-II using accessory
adaptor cable (sold separately).
Downlink Control Panel. Drop-in replacement for the HCP-50-II using
DLC50
accessory adaptor cable (sold separately).
Downlink Control Panel with NVIS-B compatibility. Drop-in replacement for
DLC50-N
the HCP-50-II using accessory adaptor cable (sold separately).
Description
Broadcast Microwave Services
2