Table of Contents
Advertisement
functions which can be added at this time are external cockpit panel dimmer voltage (0-28V), remote
serial connection (such as a secondary DLC50), and any external relay/switch controls that are desired
To DLC50
Figure 6. DLC50 TO HCP50 harness (CCII/HCII) adapter (BMS# 7314395012)
To DLC50
Figure 7. DLC50 to HCP50 harness (CTxx40ARINC) adapter (BMS# 7314395011)
to be added to the open collector outputs OC1-OC4. See following sections for detailed electrical
connections. Once all additional connections are added to the wire harness, installation in the
instrument panel is as follows:
1. Connect the 25 pin I/O connector of the wire harness to the DLC50.
The document reference is online, please check the correspondence between the online documentation and the printed version.
DLC50 Control Panel Installation and Operation Manual | Doc. No. 6051439500 Rev. A
To Existing Cable
To Existing Cable
Broadcast Microwave Services
6
Hide quick links:
Advertisement
Table of Contents
