Modifying Mac Based Acls - 3Com OfficeConnect 3CDSG10PWR User Manual

Modifying MAC
Based ACLs
1 Click Device > ACL > MAC Based ACL > Modify. The MAC Based ACL
The MAC Based ACL Modify Page allows the network administrator to
modify an existing MAC-based ACL rule.
Monitor users have no access to this page.
To modify a MAC-based ACL rule:
Modify Page opens:
Figure 29 MAC Based ACL Modify Page
The MAC Based ACL Modify Page contains the following fields:
Select ACL — Selects the ACL to be modified.
■
Select Rule — Selects the rule to be modified for the selected ACL.
■
Modify
Priority — Defines the rule priority, which determines which rule is
■
matched to a packet on a firstmatch basis.
Source MAC Address — Defines the source MAC address to which
■
packets are addressed to the rule.
Source Mask — Defines the source MAC Address wildcard mask.
■
Wildcards are used to mask all or part of a source MAC address.
Wildcard masks specify which bits are used and which are ignored. A
wildcard mask of FF:FF:FF:FF:FF:FF indicates that no bit is important. A
wildcard of 00.00.00.00.00.00.00 indicates that all bits are important.
Defining Access Control Lists 67