3Com OfficeConnect 3CDSG10PWR User Manual page 122

122 C 8: C
HAPTER ONFIGURING
VLAN
S
Not A Member — Indicates the interface is not a member of the
■
VLAN.
Not available for selection — Indicates the interface is not available
■
for selection.
Select port to add to this VLAN — Adds a selected port to the
■
VLAN.
Select All — Allows the user to select all ports to be added to the
■
VLAN.
Select None — Removes the ports selected.
■
To rename VLANs:
1 Select a VLAN from the list to be renamed.
2 Click . The VLAN is renamed, and the device is updated.
To add ports to a VLAN
1 Select a VLAN to modify.
2 Select the membership type for the selected ports.
3 Select ports to be added to the selected VLAN.
4 You may select different membership types on multiple ports by repeating
step 2 and step 3.
5 Click . The selected ports are added to the VLAN, and the device
is updated.