Removing Mac Based Acls - 3Com OfficeConnect 3CDSG10PWR User Manual

Removing MAC Based
ACLs
The MAC Based ACL Remove Page allows the user to remove MAC-based
ACLs or MAC-based ACL rules.
Monitor users have no access to this page.
Click Device > ACL > MAC Based ACL > Remove. The MAC Based ACL
Remove Page opens:
Figure 30 MAC Based ACL Remove Page
The MAC Based ACL Remove Page contains the following fields:
ACL Name — Selects a MAC-based ACL for removal.
■
Remove ACL — Enables the ACL to be removed.
■
Checkbox (unnamed) — When checked, selects the rule for removal.
■
The top checkbox is used to select all rules for removal.
Priority — Indicates the rule priority, which determines which rule is
■
matched to a packet on a firstmatch basis.
Source Address — Matches the source MAC address to which
■
packets are addressed to the rule.
Destination Address — Matches the destination MAC address to
■
which packets are addressed to the rule.
VLAN ID — Matches the packet's VLAN ID to the rule. The possible
■
field values are 1 to 4093.
CoS — Classifies Class of Service of the packet.
■
Defining Access Control Lists 69