Configuring Trust
Settings
1 Click Device > QoS > Trust > Setup. The Trust Setup Page opens:
2 Define the fields.
3 Click
The Trust Setup Page contains information for enabling trust on the
device.
To enable Trust:
Figure 83 Trust Setup Page
The Trust Setup Page contains the following fields:
Trust Mode — Specifies which packet fields to use for classifying
■
packets entering the device. When no rules are defined, the traffic
containing the predefined packet CoS field is mapped according to
the relevant trust modes table. Traffic not containing a predefined
packet field is mapped to "best effort". The possible Trust Mode field
values are:
CoS — Classifies traffic based on the CoS tag value.
■
DSCP — Classifies traffic based on the DSCP tag value.
■
. The selected Trust mode is enabled on the device.
169