Viewing Bandwidth Settings - 3Com OfficeConnect 3CDSG10PWR User Manual

170 C 13: C
HAPTER ONFIGURING
Viewing Bandwidth
Settings
Q S
UALITY OF ERVICE
The Bandwidth Summary Page displays bandwidth settings for a specified
interface.
To view Bandwidth Settings:
1 Click Device > QoS > Bandwidth > Summary. The Bandwidth
Summary Page opens:
Figure 84 Bandwidth Summary Page
The Bandwidth Summary Page contains the following fields:
Interface — Displays the interface for which rate limit and shaping
■
parameters are defined.
Ingress Rate Limit
Status — Indicates the ingress rate limiting status on the interface.
■
The possible field values are:
Enable — Ingress rate limiting is enabled on the interface.
■
Disable — Ingress rate limiting is disabled on the interface. This is
■
the default.
Rate Limit — Indicates the ingress traffic limit for the port. The field
■
range is 3,500-1,000,000 kbits per second.