10M — Indicates the port is currently operating at 10 Mbps.
■
100M — Indicates the port is currently operating at 100 Mbps.
■
1000M — Indicates the port is currently operating at 1000 Mbps.
■
Duplex Mode — Displays the port duplex mode. This field is
■
configurable only when auto negotiation is disabled, and the port
speed is set to 10M or 100M or 1000M per second. The possible field
values are:
Full — The interface supports transmission between the device and
■
its link partner in both directions simultaneously.
Half — The interface supports transmission between the device
■
and the client in only one direction at a time.
Flow Control — Displays the flow control status on the port.
■
Operates when the port is in full duplex mode. The possible field
values are:
Enable — Enables flow control on the port.
■
Disable — Disables flow control on the port.
■
101