3Com OfficeConnect 3CDSG10PWR User Manual page 95

Minutes — The minute of the hour at which DST ends. The field
■
range is 0-59.
Month — The month of the year in which DST ends. The field
■
range is 1-12.
Day — The day of the month at which DST ends. The field range is
■
1-31.
Year — The year in which DST ends. The field range is 2000-2037.
■
Recurring — Enables user-defined DST for countries in which DST is
■
constant from year to year, other than the USA and Europe.
From — Configures the recurring time and date on which DST begins
■
every year. The fields to set are:
Day — Selects the weekday on which DST begins every year.
■
Week — Selects the week of the month from which DST begins
■
every year.
Month — Selects the month of the year in which DST begins every
■
year.
Time — The time of day at which DST begins every year. The field
■
format is HH:MM, where HH is the 2-digit hour and MM is the
2-digit minute.
To — Configures the recurring time and date on which DST ends
■
every year. The fields to set are:
Day — Selects the weekday on which DST ends every year.
■
Week — Selects the week of the month at which DST ends every
■
year.
Month — Selects the month of the year in which DST ends every
■
year.
Time — The time of day at which DST ends every year. The field
■
format is HH:MM, where HH is the 2-digit hour and MM is the
2-digit minute.
2 Define the Local Settings time and date fields.
3 To configure the device to automatically switch to DST, select Daylight
Saving and select USA, European, or Other. If you select Other:
a To configure DST parameters that recur every year, select Recurring.
b Define the From and To fields.
4 Click . The time, date and DST settings are saved, and the device
is updated.
95