3Com CoreBuilder 2500 Getting Started Manual page 64

6-6 C 6: Q S
HAPTER UICK ETUP FOR
To set the interface parameters:
From the top level of the Administration Console at
1
the
Select a menu option
ip interface define
Enter the IP address of the interface.
2
Enter the subnet mask of the subnet to which the
3
interface is to be assigned.
Enter the cost value of the interface.
4
Enter the type of IP interface, either VLAN or LIS.
5
Enter one or more advertisement addresses to be
6
used on the interface.
Enter either VLAN or LIS information.
7
For a VLAN interface, enter the index of the IP
a
VLAN associated with the interface.
For a LIS interface, enter the ATM ARP server
b
address, the maximum SVC count, the inactivity
timer, the minimum holding time, and the ATM
port and PVCs associated with the interface.
M A
ANAGEMENT CCESS
prompt, enter: