10Base-Fl Module; 10Base-Fl Configuration - 3Com CoreBuilder 2500 Getting Started Manual

4-10 C 4: C
HAPTER ABLING

10BASE-FL Module

This section contains information on common
10BASE-FL configurations and how to cable the
10BASE-FL media option.
10BASE-FL Configuration
A sample 10BASE-FL configuration is illustrated in
Figure 4-11. Your configuration may have a different
number and different types of devices than pictured
in this example.
In Figure 4-11, one 10BASE-FL module with
10BASE-FL connectors is attached to various devices
through duplex fiber. These devices include:
A PC with a 10BASE-FL Network Interface Card
(NIC)
A NETBuilder II router
®
A SuperStack II stackable hub
A workstation with an AUI connector. The
duplex fiber is attached to the AUI through a
transceiver.
A workgroup concentrator
®
SuperStack II
stackables
Workstation
Transceiver
Figure 4-11 Sample Ethernet Configuration Using the
10BASE-FL Module
Duplex
fiber
PC with NIC
®
NETBuilder II router
Workgroup
concentrator